点击图片查看原图
通过认证 
| ■Uniform thickness of wire to ensure easy stripping and cutting. | |||||||
| ■Passes UL VW-1&CSA FT1 vertical flamt test | |||||||
| ■Top coated conductor is avaiable | |||||||
| 说明： | |||||||
| ■导体使用单股或绞线裸铜或镀锡铜 | |||||||
| ■FEP FRPE PE PTA PTFE TFE绝缘 | |||||||
| ■额定温度：60℃额定电压：30Volts | |||||||
| ■使用标准厚度，易剥，截断容易。 | |||||||
| ■可通过UL VW-1 及 CSA FT1 ，垂直燃烧测试 | |||||||
| APPlications: | |||||||
| ■ As insulated singles for use in jacketed cable. For use in Class 2 circuits of electronic equipment. | |||||||
| 应用： | |||||||
| ■用于电子及电器设备内部配线 | |||||||
| UL Style& CSA Type |
Conductor 导体 |
Insulation Thickness 绝缘厚度 |
Overall Diameter 完成外径 |
Stand Put-up 标准长度 |
Conductor Resistance at 20℃导体电阻 |
||
| 线号 | 线数/线径 | 英制 | 公制 | ||||
| AWG | No/mm | mm | mm | Ft/coil | M/Coil | Ω/KM | |
|
UL1914 CSA AWM I A （Stranded) 绞线 |
32 | 7/0.08 | 0.23 | 0.75 | 2000 | 610 | 597.00 |
| 30 | 7/0.102 | 0.23 | 0.80 | 2000 | 610 | 381.00 | |
| 28 | 7/0.127 | 0.23 | 0.90 | 2000 | 610 | 239.00 | |
| 26 | 7/0.16 | 0.23 | 1.00 | 2000 | 610 | 150.00 | |
| 24 | 11/0.16 | 0.23 | 1.15 | 2000 | 610 | 94.20 | |
| 22 | 17/0.16 | 0.23 | 1.30 | 2000 | 610 | 59.40 | |
| 20 | 21/0.178 | 0.23 | 1.50 | 2000 | 610 | 36.70 | |
| 18 | 34/0.178 | 0.23 | 1.70 | 2000 | 610 | 23.20 | |
| 16 | 26/0.25 | 0.23 | 2.00 | 2000 | 610 | 14.60 | |
|
UL1914 CSA AWM FT1 I A/B （Top-coated) 先绞后镀 |
28 | 7/0.127 | 0.23 | 0.90 | 2000 | 610 | 248.00 |
| 26 | 7/0.16 | 0.23 | 1.00 | 2000 | 610 | 150.00 | |
| 24 | 7/0.20 | 0.23 | 1.15 | 2000 | 610 | 88.70 | |
| 22 | 7/0.254 | 0.23 | 1.30 | 2000 | 610 | 54.70 | |
| 20 | 7/0.32 | 0.23 | 1.50 | 2000 | 610 | 37.10 | |
|
UL1914 CSA AWM I A （Solid) 单股 |
28 | 1/0.32 | 0.23 | 0.85 | 2000 | 610 | 239.00 |
| 26 | 1/0.404 | 0.23 | 0.90 | 2000 | 610 | 143.00 | |
| 24 | 1/0.511 | 0.23 | 1.10 | 2000 | 610 | 89.30 | |
| 22 | 1/0.634 | 0.23 | 1.25 | 2000 | 610 | 56.40 | |
| 20 | 1/0.813 | 0.23 | 1.45 | 2000 | 610 | 35.20 | |
| 以上数据仅供参考，不作为正式的设计依据，产品规格以双方确认的规格书承认为准！最终解释权归稳畅电子制品有限公司所有 | |||||||
